Because silicone rubber heater MG type (Neodymium) has magnet sheet on one side, it can be installed easily on any place where magnet adherence is available. Moreover, this can be installed/replaced easily for maintenance/alignment of the heater.
-
Different types of heaters such as round, triangle, or ones with holes offered at reasonable prices. Minimum order of one piece, with a quick delivery option.
-
High thermal response due to low thickness, with a standard thickness of 1.5mm.
-
Easy fit on cylinders, cones, and various curved surfaces because of its high flexibility.
-
Available from low temperature through 200°C [392°F].
-
Different designs including low voltage, 100V, 200V and 240V types available.
* (approximately 20 percent magnetic power degradation at 200°C [392°F].)
Heat tolerance |
Heat Tolerance |
200°C |
Max temperature |
250°C |
Electric properties |
Capacity Tolerance |
±10% |
Insulation Resistance |
100MΩ or over/DC500V |
Electric Strength |
1500V/1min |
Size |
Max |
450mm×3000mm |
Min |
25mm×50mm |
Thickness |
1.5mm |
OT-9 Separated type |
Pt100Ω Sensor
K Thermo-couple |
OT-9 PRO |
K Thermo-couple |
EGO |
0-40°C, 30-110°C, 60-200°C |
Bimetal Switch |
10°C-200°C Temperature preference |
Thermal Fuse |
77°C-240°C Temperature preference
|